Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

Статус
Закрыто для дальнейших ответов.
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Продаю Eye-One Pro (No Filter) Б.У
Комплект поставки:
Спектрофотометр Eye-One Pro
Eye-One Scan Target 1.4
LCD monitor holder
Positioning target
New Scanning ruler, backup board and softcase
Calibration plate
USB-кабель

цена 26 т.р.

General Information
Date and Time: 26.01.2011 17:49:38
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 306414
Firmware version: 502
CPLD version: 999
Dark measurement count: 3030
Lamp burning time: 441.597 seconds
Spot measurement count: 251
Scan measurement count: 66

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 26.01.2011 17:49:38
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 306414
Firmware version: 502
CPLD version: 999
Dark measurement count: 3030
Lamp burning time: 441.597 seconds
Spot measurement count: 251
Scan measurement count: 66

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=117.562 Y=123.465 Z=140.169)
Gray measurement: Successful (X=42.036 Y=44.260 Z=51.225)
Black measurement: Successful (X=0.099 Y=0.115 Z=0.193)
Red measurement: Successful (X=41.208 Y=22.794 Z=1.077)
Green measurement: Successful (X=51.688 Y=90.927 Z=7.959)
Blue measurement: Successful (X=24.747 Y=9.769 Z=132.281)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-157.000)

Noise Measurement
Noise measurement: Pass (2.270)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=442.245 seconds, CIT=0.01584 seconds, LIT=0.0160248 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.999 a=-0.470 b=2.241)
Measurement 2: Successful (L=95.992 a=-0.476 b=2.239)
Measurement 3: Successful (L=95.971 a=-0.494 b=2.282)
Measurement 4: Successful (L=95.976 a=-0.504 b=2.288)
Measurement 5: Successful (L=95.964 a=-0.507 b=2.299)
Measurement 6: Successful (L=95.964 a=-0.508 b=2.300)
Measurement 7: Successful (L=95.961 a=-0.508 b=2.303)
Measurement 8: Successful (L=95.957 a=-0.512 b=2.313)
Measurement 9: Successful (L=95.950 a=-0.511 b=2.325)
Measurement 10: Successful (L=95.960 a=-0.513 b=2.316)
Reflectance drift test: Pass (0.029)


*** PASS ***
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

Продаю Eye-One Pro (No Filter) Б.У
Комплект поставки:
Спектрофотометр Eye-One Pro
Eye-One Scan Target 1.4
LCD monitor holder
Positioning target
New Scanning ruler, backup board and softcase
Calibration plate
USB-кабель

цена 23 т.р.

General Information
Date and Time: 27.01.2011 20:11:16
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 125684
Firmware version: 302
CPLD version: 301
Dark measurement count: 880
Lamp burning time: 483.6 seconds
Spot measurement count: 99
Scan measurement count: 211

Dongle Test
Module "Scanner" is licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is licensed
Module "Editor" is licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 27.01.2011 20:11:16
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 125684
Firmware version: 302
CPLD version: 301
Dark measurement count: 880
Lamp burning time: 483.6 seconds
Spot measurement count: 99
Scan measurement count: 211

Dongle Test
Module "Scanner" is licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is licensed
Module "Editor" is licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=119.101 Y=124.981 Z=139.137)
Gray measurement: Successful (X=44.053 Y=46.255 Z=52.941)
Black measurement: Successful (X=0.112 Y=0.091 Z=0.211)
Red measurement: Successful (X=42.104 Y=23.224 Z=1.096)
Green measurement: Successful (X=52.359 Y=92.171 Z=7.998)
Blue measurement: Successful (X=24.752 Y=9.727 Z=131.246)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-36.031)

Noise Measurement
Noise measurement: Pass (3.178)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=484.262 seconds, CIT=0.02033 seconds, LIT=0.0205947 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=96.624 a=-0.611 b=1.530)
Measurement 2: Successful (L=96.606 a=-0.620 b=1.570)
Measurement 3: Successful (L=96.596 a=-0.631 b=1.595)
Measurement 4: Successful (L=96.570 a=-0.626 b=1.671)
Measurement 5: Successful (L=96.576 a=-0.642 b=1.672)
Measurement 6: Successful (L=96.581 a=-0.642 b=1.666)
Measurement 7: Successful (L=96.582 a=-0.650 b=1.662)
Measurement 8: Successful (L=96.587 a=-0.655 b=1.674)
Measurement 9: Successful (L=96.570 a=-0.644 b=1.693)
Measurement 10: Successful (L=96.580 a=-0.655 b=1.692)
Reflectance drift test: Pass (0.051)


*** PASS ***
 
O

olphoto

Участник
Сообщения
6
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

Интересен второй прибор. Мой номер 89037277987.
 
alex103

alex103

PROцвет
15 лет на форуме
Сообщения
600
Реакции
132
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

Как с Вами связаться?
Есть интерес к любому из приборов ;)
 
alex103

alex103

PROцвет
15 лет на форуме
Сообщения
600
Реакции
132
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

Надеюсь, не офтопик.
А может кому-нибудь будет полезно.
Приобрел прибор у г-на MadForce. Приятно порадовала готовность все показать, рассказать. Получил диагностическую инфу и фото.
Не откладывая в долгий ящик - оплатил прибор. Отправили быстрокурьерской службой и вот, я уже счастливый обладатель прибора. Всего-то сутки ожидания, хотя я и в Ростове-на-Дону.
Все было аккуратно упаковано и целехонько.

Выражаю благодарность и свое почтение.
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

Продаю Eye-One Pro (No Filter) Б.У
Комплект поставки:
Спектрофотометр Eye-One Pro
Eye-One Scan Target 1.4
LCD monitor holder
Positioning target
New Scanning ruler, backup board and softcase
Calibration plate
USB-кабель

цена 26 т.р.


General Information
Date and Time: 21.04.2011 21:40:23
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 312313
Firmware version: 503
CPLD version: 999
Dark measurement count: 442
Lamp burning time: 119.239 seconds
Spot measurement count: 79
Scan measurement count: 1

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 21.04.2011 21:40:23
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 312313
Firmware version: 503
CPLD version: 999
Dark measurement count: 442
Lamp burning time: 119.239 seconds
Spot measurement count: 79
Scan measurement count: 1

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=111.224 Y=116.972 Z=128.336)
Gray measurement: Successful (X=42.017 Y=44.001 Z=50.142)
Black measurement: Successful (X=0.119 Y=0.161 Z=0.195)
Red measurement: Successful (X=40.392 Y=22.382 Z=0.996)
Green measurement: Successful (X=48.396 Y=86.118 Z=7.957)
Blue measurement: Successful (X=22.301 Y=8.127 Z=118.998)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-202.109)

Noise Measurement
Noise measurement: Pass (3.211)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=120.302 seconds, CIT=0.0117 seconds, LIT=0.0154439 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.715 a=-0.390 b=2.558)
Measurement 2: Successful (L=95.689 a=-0.393 b=2.578)
Measurement 3: Successful (L=95.681 a=-0.402 b=2.574)
Measurement 4: Successful (L=95.655 a=-0.393 b=2.584)
Measurement 5: Successful (L=95.660 a=-0.403 b=2.588)
Measurement 6: Successful (L=95.652 a=-0.398 b=2.591)
Measurement 7: Successful (L=95.648 a=-0.397 b=2.594)
Measurement 8: Successful (L=95.651 a=-0.404 b=2.600)
Measurement 9: Successful (L=95.646 a=-0.406 b=2.606)
Measurement 10: Successful (L=95.641 a=-0.404 b=2.609)
Reflectance drift test: Pass (0.023)


*** PASS ***
121_5-1.jpg
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

Продаю Eye-One Pro с фильтром.
Комплект поставки:
Спектрофотометр Eye-One Pro с фиксированным UV-фильтром
LCD monitor holder
Positioning target
New Scanning ruler, backup board and softcase
Calibration plate
USB-кабель
Сумка
цена 25 т.р.
электропочта: madforce77@gmail.com
General Information
Date and Time: 13.05.2011 23:48:36
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 899868
Firmware version: 505
CPLD version: 999
Dark measurement count: 127
Lamp burning time: 262.149 seconds
Spot measurement count: 54
Scan measurement count: 48

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 13.05.2011 23:48:36
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 899868
Firmware version: 505
CPLD version: 999
Dark measurement count: 127
Lamp burning time: 262.149 seconds
Spot measurement count: 54
Scan measurement count: 48

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=120.357 Y=125.958 Z=136.607)
Gray measurement: Successful (X=47.362 Y=49.516 Z=55.338)
Black measurement: Successful (X=0.211 Y=0.191 Z=0.348)
Red measurement: Successful (X=44.023 Y=24.307 Z=1.194)
Green measurement: Successful (X=52.416 Y=92.587 Z=8.126)
Blue measurement: Successful (X=23.712 Y=8.831 Z=127.322)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-197.750)

Noise Measurement
Noise measurement: Pass (3.122)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=263.197 seconds, CIT=0.01095 seconds, LIT=0.0101619 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=96.672 a=-0.486 b=1.548)
Measurement 2: Successful (L=96.675 a=-0.491 b=1.561)
Measurement 3: Successful (L=96.676 a=-0.492 b=1.553)
Measurement 4: Successful (L=96.690 a=-0.499 b=1.552)
Measurement 5: Successful (L=96.696 a=-0.503 b=1.566)
Measurement 6: Successful (L=96.692 a=-0.499 b=1.565)
Measurement 7: Successful (L=96.695 a=-0.492 b=1.530)
Measurement 8: Successful (L=96.713 a=-0.504 b=1.543)
Measurement 9: Successful (L=96.705 a=-0.503 b=1.552)
Measurement 10: Successful (L=96.712 a=-0.498 b=1.556)
Reflectance drift test: Pass (0.017)


*** PASS ***
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

Цена снижена
23 т.р.
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

X-Rite Eye-One Pro (No Filter) REVD
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder


General Information
Date and Time: 04.07.2011 12:52:26
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 301568
Firmware version: 502
CPLD version: 999
Dark measurement count: 5401
Lamp burning time: 10710.3 seconds
Spot measurement count: 1828
Scan measurement count: 858

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 04.07.2011 12:52:26
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 301568
Firmware version: 502
CPLD version: 999
Dark measurement count: 5401
Lamp burning time: 10710.3 seconds
Spot measurement count: 1828
Scan measurement count: 858

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=108.055 Y=113.537 Z=126.782)
Gray measurement: Successful (X=41.347 Y=43.149 Z=50.177)
Black measurement: Successful (X=0.136 Y=0.137 Z=0.188)
Red measurement: Successful (X=39.167 Y=21.858 Z=1.035)
Green measurement: Successful (X=46.718 Y=83.447 Z=7.842)
Blue measurement: Successful (X=22.108 Y=7.899 Z=118.215)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-190.859)

Noise Measurement
Noise measurement: Pass (2.799)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=10710.9 seconds, CIT=0.01319 seconds, LIT=0.0129405 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=96.173 a=-0.477 b=2.172)
Measurement 2: Successful (L=96.146 a=-0.472 b=2.198)
Measurement 3: Successful (L=96.137 a=-0.476 b=2.211)
Measurement 4: Successful (L=96.123 a=-0.470 b=2.220)
Measurement 5: Successful (L=96.101 a=-0.468 b=2.254)
Measurement 6: Successful (L=96.102 a=-0.465 b=2.258)
Measurement 7: Successful (L=96.092 a=-0.465 b=2.258)
Measurement 8: Successful (L=96.086 a=-0.468 b=2.280)
Measurement 9: Successful (L=96.073 a=-0.466 b=2.296)
Measurement 10: Successful (L=96.075 a=-0.463 b=2.293)
Reflectance drift test: Pass (0.045)


*** PASS ***
i1basic.jpg
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

X-Rite Eye-One Pro (No Filter) REVB БУ
цена 18 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 22.07.2011 11:41:26
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 122624
Firmware version: 302
CPLD version: 301
Dark measurement count: 5010
Lamp burning time: 10424.5 seconds
Spot measurement count: 3954
Scan measurement count: 924

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is not working or was not pressed
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 22.07.2011 11:41:26
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 122624
Firmware version: 302
CPLD version: 301
Dark measurement count: 5010
Lamp burning time: 10424.5 seconds
Spot measurement count: 3954
Scan measurement count: 924

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is not working or was not pressed
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=101.888 Y=106.787 Z=115.253)
Gray measurement: Successful (X=39.447 Y=41.285 Z=46.048)
Black measurement: Successful (X=0.151 Y=0.159 Z=0.269)
Red measurement: Successful (X=37.017 Y=20.433 Z=0.960)
Green measurement: Successful (X=44.686 Y=78.824 Z=7.079)
Blue measurement: Successful (X=20.199 Y=7.554 Z=107.526)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-30.133)

Noise Measurement
Noise measurement: Pass (2.992)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=10425.1 seconds, CIT=0.02217 seconds, LIT=0.0252431 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.893 a=-0.488 b=1.696)
Measurement 2: Successful (L=95.858 a=-0.482 b=1.741)
Measurement 3: Successful (L=95.825 a=-0.487 b=1.822)
Measurement 4: Successful (L=95.789 a=-0.472 b=1.862)
Measurement 5: Successful (L=95.781 a=-0.463 b=1.886)
Measurement 6: Successful (L=95.772 a=-0.463 b=1.902)
Measurement 7: Successful (L=95.764 a=-0.462 b=1.915)
Measurement 8: Successful (L=95.761 a=-0.460 b=1.921)
Measurement 9: Successful (L=95.738 a=-0.438 b=1.958)
Measurement 10: Successful (L=95.743 a=-0.450 b=1.960)
Reflectance drift test: Pass (0.081)


*** PASS ***
eye-one_large.jpg
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

Продаю Eye-One Pro (No Filter) Б.У
Комплект поставки:
Спектрофотометр Eye-One Pro
Eye-One Scan Target 1.4
LCD monitor holder
Positioning target
New Scanning ruler, backup board and softcase
Calibration plate
USB-кабель
Цена 23 т.р.

General Information
Date and Time: 28.07.2011 13:51:10
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 311309
Firmware version: 503
CPLD version: 999
Dark measurement count: 3345
Lamp burning time: 150.98 seconds
Spot measurement count: 99
Scan measurement count: 11

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 28.07.2011 13:51:10
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 311309
Firmware version: 503
CPLD version: 999
Dark measurement count: 3345
Lamp burning time: 150.98 seconds
Spot measurement count: 99
Scan measurement count: 11

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=110.190 Y=116.433 Z=126.960)
Gray measurement: Successful (X=39.032 Y=41.005 Z=46.784)
Black measurement: Successful (X=0.057 Y=0.048 Z=0.204)
Red measurement: Successful (X=39.764 Y=22.027 Z=1.096)
Green measurement: Successful (X=48.291 Y=86.285 Z=8.058)
Blue measurement: Successful (X=22.095 Y=8.091 Z=118.032)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-200.367)

Noise Measurement
Noise measurement: Pass (3.118)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=151.62 seconds, CIT=0.01278 seconds, LIT=0.0133706 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.738 a=-0.459 b=2.550)
Measurement 2: Successful (L=95.726 a=-0.450 b=2.550)
Measurement 3: Successful (L=95.705 a=-0.453 b=2.570)
Measurement 4: Successful (L=95.700 a=-0.454 b=2.567)
Measurement 5: Successful (L=95.691 a=-0.450 b=2.572)
Measurement 6: Successful (L=95.683 a=-0.452 b=2.588)
Measurement 7: Successful (L=95.694 a=-0.450 b=2.586)
Measurement 8: Successful (L=95.680 a=-0.454 b=2.595)
Measurement 9: Successful (L=95.676 a=-0.447 b=2.602)
Measurement 10: Successful (L=95.683 a=-0.450 b=2.595)
Reflectance drift test: Pass (0.023)


*** PASS ***
1413461529_696.jpg
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

X-Rite Eye-One Pro (No Filter) REVD
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 29.08.2011 20:37:29
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 328851
Firmware version: 503
CPLD version: 999
Dark measurement count: 83
Lamp burning time: 88.6901 seconds
Spot measurement count: 75
Scan measurement count: 1

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 29.08.2011 20:37:29
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 328851
Firmware version: 503
CPLD version: 999
Dark measurement count: 83
Lamp burning time: 88.6901 seconds
Spot measurement count: 75
Scan measurement count: 1

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=140.348 Y=146.016 Z=130.033)
Gray measurement: Successful (X=59.878 Y=61.696 Z=55.132)
Black measurement: Successful (X=0.177 Y=0.174 Z=0.320)
Red measurement: Successful (X=59.221 Y=32.692 Z=1.601)
Green measurement: Successful (X=58.378 Y=104.591 Z=10.322)
Blue measurement: Successful (X=21.483 Y=7.381 Z=115.693)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-185.219)

Noise Measurement
Noise measurement: Pass (3.154)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=89.3257 seconds, CIT=0.01197 seconds, LIT=0.0118541 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.717 a=-0.275 b=2.441)
Measurement 2: Successful (L=95.695 a=-0.276 b=2.465)
Measurement 3: Successful (L=95.695 a=-0.267 b=2.438)
Measurement 4: Successful (L=95.667 a=-0.275 b=2.478)
Measurement 5: Successful (L=95.679 a=-0.283 b=2.470)
Measurement 6: Successful (L=95.679 a=-0.296 b=2.498)
Measurement 7: Successful (L=95.667 a=-0.298 b=2.515)
Measurement 8: Successful (L=95.685 a=-0.302 b=2.500)
Measurement 9: Successful (L=95.686 a=-0.313 b=2.508)
Measurement 10: Successful (L=95.695 a=-0.315 b=2.504)
Reflectance drift test: Pass (0.032)
1413461529_188.jpg
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

X-Rite Eye-One Pro (UV Filter) REVD
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder

General Information
Date and Time: 29.08.2011 20:44:47
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 899141
Firmware version: 505
CPLD version: 999
Dark measurement count: 0
Lamp burning time: 0 seconds
Spot measurement count: 0
Scan measurement count: 0

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 29.08.2011 20:44:47
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (UV CUT filter) [ Emission Reflectance Reflectance Scan ]
Serial number: 899141
Firmware version: 505
CPLD version: 999
Dark measurement count: 0
Lamp burning time: 0 seconds
Spot measurement count: 0
Scan measurement count: 0

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is not licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=138.771 Y=144.960 Z=125.277)
Gray measurement: Successful (X=57.730 Y=59.592 Z=51.919)
Black measurement: Successful (X=0.106 Y=0.108 Z=0.240)
Red measurement: Successful (X=59.706 Y=32.921 Z=1.469)
Green measurement: Successful (X=57.332 Y=103.401 Z=10.164)
Blue measurement: Successful (X=20.723 Y=7.184 Z=111.579)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-190.250)

Noise Measurement
Noise measurement: Pass (3.144)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=1.07214 seconds, CIT=0.01462 seconds, LIT=0.0158094 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.718 a=-0.411 b=2.128)
Measurement 2: Successful (L=95.693 a=-0.403 b=2.122)
Measurement 3: Successful (L=95.710 a=-0.424 b=2.140)
Measurement 4: Successful (L=95.677 a=-0.408 b=2.133)
Measurement 5: Successful (L=95.689 a=-0.422 b=2.131)
Measurement 6: Successful (L=95.684 a=-0.431 b=2.177)
Measurement 7: Successful (L=95.703 a=-0.428 b=2.133)
Measurement 8: Successful (L=95.695 a=-0.435 b=2.175)
Measurement 9: Successful (L=95.695 a=-0.439 b=2.176)
Measurement 10: Successful (L=95.688 a=-0.427 b=2.151)
Reflectance drift test: Pass (0.025)


*** PASS ***
1413461529_188.jpg
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

X-Rite Eye-One Pro (No Filter) REVD
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder
электропочта: madforce77@gmail.com

General Information
Date and Time: 21.09.2011 12:23:25
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 341237
Firmware version: 505
CPLD version: 999
Dark measurement count: 58511
Lamp burning time: 45.9952 seconds
Spot measurement count: 140
Scan measurement count: 6

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 21.09.2011 12:23:25
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 341237
Firmware version: 505
CPLD version: 999
Dark measurement count: 58511
Lamp burning time: 45.9952 seconds
Spot measurement count: 140
Scan measurement count: 6

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is not licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is not licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=141.099 Y=146.926 Z=126.965)
Gray measurement: Successful (X=59.179 Y=61.061 Z=53.526)
Black measurement: Successful (X=0.247 Y=0.224 Z=0.377)
Red measurement: Successful (X=61.102 Y=33.699 Z=1.568)
Green measurement: Successful (X=57.888 Y=104.337 Z=10.466)
Blue measurement: Successful (X=21.055 Y=7.417 Z=113.071)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-190.273)

Noise Measurement
Noise measurement: Pass (3.035)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=47.0534 seconds, CIT=0.01278 seconds, LIT=0.013121 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=95.803 a=-0.401 b=2.473)
Measurement 2: Successful (L=95.784 a=-0.408 b=2.484)
Measurement 3: Successful (L=95.772 a=-0.411 b=2.508)
Measurement 4: Successful (L=95.754 a=-0.414 b=2.534)
Measurement 5: Successful (L=95.754 a=-0.412 b=2.532)
Measurement 6: Successful (L=95.742 a=-0.407 b=2.536)
Measurement 7: Successful (L=95.755 a=-0.411 b=2.528)
Measurement 8: Successful (L=95.749 a=-0.411 b=2.541)
Measurement 9: Successful (L=95.743 a=-0.422 b=2.566)
Measurement 10: Successful (L=95.732 a=-0.418 b=2.581)
Reflectance drift test: Pass (0.030)


*** PASS ***

1413461529_188.jpg
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

X-Rite Eye-One Pro (No Filter) REVD
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder
электропочта: madforce77@gmail.com


General Information
Date and Time: 15.10.2011 10:37:04
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows ???, Service Pack 1

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 320878
Firmware version: 503
CPLD version: 999
Dark measurement count: 16776
Lamp burning time: 4594.75 seconds
Spot measurement count: 481
Scan measurement count: 890

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 15.10.2011 10:37:04
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows ???, Service Pack 1

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 320878
Firmware version: 503
CPLD version: 999
Dark measurement count: 16776
Lamp burning time: 4594.75 seconds
Spot measurement count: 481
Scan measurement count: 890

Dongle Test
Module "Scanner" is not licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is not licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is not licensed
Module "Digicam" is not licensed
Module "Editor" is not licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=107.529 Y=114.640 Z=123.006)
Gray measurement: Successful (X=45.428 Y=48.058 Z=55.028)
Black measurement: Successful (X=0.164 Y=0.178 Z=0.225)
Red measurement: Successful (X=49.396 Y=25.821 Z=1.247)
Green measurement: Successful (X=34.331 Y=71.461 Z=11.700)
Blue measurement: Successful (X=21.207 Y=14.274 Z=109.863)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-194.180)

Noise Measurement
Noise measurement: Pass (2.954)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=4595.39 seconds, CIT=0.01238 seconds, LIT=0.014358 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=96.048 a=-0.498 b=2.464)
Measurement 2: Successful (L=96.023 a=-0.500 b=2.500)
Measurement 3: Successful (L=96.004 a=-0.500 b=2.536)
Measurement 4: Successful (L=95.968 a=-0.489 b=2.590)
Measurement 5: Successful (L=95.967 a=-0.488 b=2.583)
Measurement 6: Successful (L=95.957 a=-0.488 b=2.616)
Measurement 7: Successful (L=95.951 a=-0.488 b=2.635)
Measurement 8: Successful (L=95.953 a=-0.488 b=2.636)
Measurement 9: Successful (L=95.932 a=-0.487 b=2.687)
Measurement 10: Successful (L=95.936 a=-0.483 b=2.667)
Reflectance drift test: Pass (0.065)


*** PASS ***

1413461529_188.jpg
 
M

MadForce

Участник
Топикстартер
Сообщения
42
Реакции
0
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

X-Rite Eye-One Pro (No Filter) REV B
цена 23 т.р.
Комплектация:
Eye-One Pro
Calibration cradle
Patch quide
USB cable
Strip quide
Flat panel holder
Scan Target chart
электропочта: madforce77@gmail.com

General Information
Date and Time: 03.11.2011 15:08:08
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 127426
Firmware version: 302
CPLD version: 301
Dark measurement count: 1038
Lamp burning time: 904.487 seconds
Spot measurement count: 87
Scan measurement count: 141

Dongle Test
Module "Scanner" is licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is licensed
Module "Editor" is licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful
Gray measurement: Successful
Black measurement: Successful
Red measurement: Successful
Green measurement: Successful
Blue measurement: Successful
Emission Test: Pass

Dark measurement
Dark measurement: Pass

Noise Measurement
Noise measurement: Pass

Lamp test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful
Measurement 2: Successful
Measurement 3: Successful
Measurement 4: Successful
Measurement 5: Successful
Measurement 6: Successful
Measurement 7: Successful
Measurement 8: Successful
Measurement 9: Successful
Measurement 10: Successful
Reflectance drift test: Pass


*** PASS ***


**************************

General Information
Date and Time: 03.11.2011 15:08:08
Application version: Version 2.5.1
SDK version i1: Version 3.4.0 Build 131
SDK version iO: Version 1.1.2 Build 100
SDK version iSis: Version 1.0.6 Build 72
Platform: Microsoft Windows XP Professional, Service Pack 3

Device Information
Device type: i1Pro (NO filter) [ Ambient Light Emission Reflectance Reflectance Scan Flash ]
Serial number: 127426
Firmware version: 302
CPLD version: 301
Dark measurement count: 1038
Lamp burning time: 904.487 seconds
Spot measurement count: 87
Scan measurement count: 141

Dongle Test
Module "Scanner" is licensed
Module "Monitor" is licensed
Module "Printer" is not licensed
Module "Printer RGB only" is licensed
Module "Printer CMYK only" is not licensed
Module "Beamer" is licensed
Module "Printer Easy RGB" is licensed
Module "Printer Easy CMYK" is licensed
Module "Digicam" is licensed
Module "Editor" is licensed

Button Test
Button is working normally

Calibration
Emission calibration: Successful

Emission Test
White measurement: Successful (X=131.227 Y=136.785 Z=124.089)
Gray measurement: Successful (X=61.083 Y=63.182 Z=56.318)
Black measurement: Successful (X=0.057 Y=0.066 Z=0.288)
Red measurement: Successful (X=53.761 Y=29.399 Z=1.337)
Green measurement: Successful (X=55.443 Y=98.521 Z=9.191)
Blue measurement: Successful (X=20.752 Y=7.363 Z=111.891)
Emission Test: Pass

Dark measurement
Dark measurement: Pass (-35.039)

Noise Measurement
Noise measurement: Pass (3.147)

Lamp Test
Reflectance calibration: Successful
Reflectance measurement: Successful
Check measurement result: Successful

Reflectance Test
Reflectance calibration: Successful
Reflectance spot test: Successful (LOT=905.128 seconds, CIT=0.0138 seconds, LIT=0.0138308 seconds)
Scanning calibration: Successful
Reflectance scan test: Successful
Measurement 1: Successful (L=96.134 a=-0.555 b=2.422)
Measurement 2: Successful (L=96.133 a=-0.578 b=2.453)
Measurement 3: Successful (L=96.128 a=-0.593 b=2.458)
Measurement 4: Successful (L=96.105 a=-0.593 b=2.472)
Measurement 5: Successful (L=96.105 a=-0.591 b=2.478)
Measurement 6: Successful (L=96.106 a=-0.599 b=2.486)
Measurement 7: Successful (L=96.103 a=-0.596 b=2.510)
Measurement 8: Successful (L=96.099 a=-0.602 b=2.509)
Measurement 9: Successful (L=96.080 a=-0.599 b=2.512)
Measurement 10: Successful (L=96.091 a=-0.605 b=2.508)
Reflectance drift test: Pass (0.031)


*** PASS ***

1413461529_188.jpg
 
svlasov

svlasov

Администратор
20 лет на форуме
Сообщения
2 228
Реакции
4 933
Ответ: Продам спектрофотометер X-rite/GretegMacbeth Eye0-One Pro (Москва)

MadForce, для таких постов, как ваш, на нашем форуме предусмотрен специальный тэг [noparse]
[/noparse].
 
Статус
Закрыто для дальнейших ответов.
Верх Низ